Polling Interval Menu
Setting the Polling Interval
Press 1 to get to the polling interval menu as seen in the following image:
The polling interval determines how often the base unit reads and updates values from its connected sensors. Follow this step-by-step guide to set the polling interval:
Select Polling Interval from the list of options
Enter the desired polling interval in seconds
Press the Enter key to confirm your selection
💡 The polling interval can depend on the sensors connected to the base unit; some sensors require longer preheat times to produce a value. It can take up 1 minute after starting the device for the device to know the final poll duration.
Simply press the ESC key if you need to cancel the process at any time.
📔 There is currently no protection from setting an incorrect polling rate. However, if this occurs, the base unit will automatically adjust the polling rate to the nearest valid rate.