System Settings Menu

The following image shows the system settings menu. This menu is a central feature allowing users to manage the unit's general system settings and configure the base unit during its initial configuration and setup process.Initial set up parameters, as described in the following table:

Characteristic	Value
Type	Modbus RTU Slave
Insulation	Insulated or Non-Insulated
Baud Rate	9600 bit/s
Data Bits	8
parity	None
Bit Stops	2
Modbus Address	1 (0x1)

📔The menu, illustrated in this image, currently includes only the polling interval section. Additional settings will be added at a later date to give users greater control over the Modbus unit's system settings.